The Linear magnetic drive sliding door utilizes the principle of the magnetic field: there is the repulsion of the same poles and attraction of the opposite poles. Two parallel magnetic fields are divided into many uniformly sized N and S poles. The thrust and pull forces are generated with the continuous conversion of the magnetic field so that the door body moves continuously.
- Latest linear maglev drive technology.
- Ultra-quiet, no noise.
- For single-leaf door up to 100kg.
- High standard of safety.
- Compact design.
- Thanks to linear maglev drive technology, the motor runs with basically no noise and low switching loss. The three-way closed-loop control improves the safety and fluency of the unit operation.
- It complies with the European Low Energy Consumption Mode standard, showing its advanced automatic sliding door magnetic levitation sensing technology. Due to the low energy consumption mode, the automatic sliding door system can operate in the low energy consumption range without using a safety sensor for the first time.
- The electric drive in the system directly converts electrical energy into linear motion mechanical energy. It can eliminate a large number of intermediate transmission mechanisms, speed up the system response speed, and improve system accuracy.
- Drive the doors by the magnetic levitation without a toothed belt. Provide a silent and smooth operation.
- When encountering a little obstacle, the door will stop and open immediately to ensure 100% safety.
- Adjust the parameters of the controller through APP and Bluetooth.
- Lightweight and space-saving. It can be used in offices, homes, restaurants, etc. It can be equipped with a variety of doors to meet various needs.
When power is on, the repulsion and attraction of Suspended magnet and magnet in the guide wheel generate the force to drive the door open and close. Smooth running with no noise.
Rail Length (optional): 1.9m/2.1m/2.3m.
Weight of Body | 20~80kg | 30~90kg | 40~100kg |
Rail Length | 1900mm | 2100mm | 2300mm |
Max Door Width | 900mm | 1000mm | 1100mm |
Door Configuration | Sing / Double Open | ||
Opening and Closing Speed | 100~500mm/s | ||
Hold Time | 0~20S | ||
Supply Voltage | AC220V~230V 50/60HZ | ||
Rated Power | 80W | ||
Standby Power | 3W | ||
Operating Temperature | -20℃+50℃ |
There are two types of doors: single-leaf and double-leaf. We should take 2 sets of the unit to work together for the double-leaf magnetic levitation door. (As shown in the picture)
High strength aluminum alloy rail with polished surface, firm structure. And the length of the aluminum alloy rail can be customized according to the width of your doors.
The Linear magnetic drive sliding door demonstrates modern and elegant interior design. Thanks to its restrained and classic design, It can be combined with most glass or wooden doors. In addition to its exquisite appearance, the various functions of the system also provide a high level of comfort. When a microwave radar motion detector is installed, the door opens and closes automatically and almost silently.
Installation Diagram for Frameless Glass Door
Installation Diagram for Framed Wooden Door
The Linear magnetic drive sliding door system is especially suitable for interior doors because it is ultra-quiet and with no noise. It will become a prominent symbol for private homes and many commercial places such as clinics, offices, hotels, and restaurants.
Reason | Inspection | |
Door body don't move | Power is not on | Check the power cable, check the power switch |
Foreign matters on the rail | Turn off the power, push the door by hand to see if the door moves smoothly | |
Automatic protection | Check if there is any obstacle on the way | |
Door is locked | Check if there is an external lock | |
Door can't be fully opened | Half-open mode | Check if it's set to half-open modeDoor can't be closed./ Door operates abnormally |
Door can't be closed./ Door operates abnormally | Sensor misoperation | Check for continuous moving items within the sensing range |
Short-circuit of control signal line | Disconnect the signal line and see if it worked | |
Microwave interference source around the door | Check the microwave interference source | |
Continuous operation of the safe beam | Confirm whether the safe beams are covered by dirt | |
Confirm whether the safe beams deviate from the right angle | ||
Door runs not smoothly | High running resistance | Check if there are foreign matters on the rail |
Check if there is an obstacle on the door body | ||
Inappropriate speed for opening and closing | Check the speed adjustment |
Get a Free Quote
Please complete and submit the form below, We aim to respond to your email inquiry as soon as possible.