- This product is with the function of coding self-learn. Make sure the code of remote transmitter has been learned into the receiver before using (16 kinds of codes can be learned)
- Operation way: Press the learned button for 1S, the indicator turns green. Press any key of the remote transmitter. The transmitter has been learned by the receiver successfully with two flashes of green light appears.
Delete method: Press the learn button for 5S, green light flashing, all the codes have been deleted successfully( Can not delete one by one)
Press the remote control A key(Full lock): All sensors and access controllers lose effectiveness. electric lock locked automatically. People inside and outside can not enter. Be used for preventing thieves at night or on holiday periods.
Press the remote control B key(Unidirectional): External sensor loses effectiveness and electric lock locked automatically while the external access controller and internal sensor are still running. Only an insider can get in by swiping the card. The internal sensor is effective, and people can get out. Be used for clearing up a gathering place.
Press the remote control C key(Full open): Under M type working, press remote to open the door for 5S and get back to standby mode. Press remote for 3S. All sensors and access controllers lose effectiveness. The door keeps fully open. For emergency using.
Press the remote control D key(Bi-directional): Internal and external probes are effective . Working hours with normal business.
Features
- High-current electric lock output module.
- DC/AC 12V ~ 36V power input and convenient to take power from sliding.
- Delicate shell design, easy-to-fixed, compact and small size.
- Built-in surge absorber to prevent the return spark of electric lock.
- Remote transmitter with 4 keys to carry out the 4 operations of autodoor.
- All induction gated signal unified into the Extender which outputs the signal to autodoor and electric locks. With time difference setting to ensure the autodoor
- runs automatically.
- Using remote controller to switch function,validity action confirms by voice indicator.
- Notes :The system is with memory function in case of power-down.
- The input signal for access controller should be passive contact signal, or input PUSH signal directly.
Getting power supply of AC/DC24V from Autodoor Unit
DC12V Power Supply for Autodoor Remote Controller
External and Internal probe should not get power from this extender directly. Can be connect with terminal of autodoor (which for probes).
Name | Remote controller for automatic doors (Type A) |
Voltage | DC 12V |
Current of electric lock | 3A(12V) |
Static Power | 35mA |
Action current | 85mA(Non-current electric lock) |
Professional appliance | Built-in surge absorber |
Transmitting and receiving method | Microwave level with a roller code |
Remote control battery using life | ≥18000 times |
Working environment temperature | -42℃~45℃ |
Working environment humidity | 10~90%RH |
Appearance dimension | 123(L)x50(W)x32(H)mm |
The total weight | 170g |
Specific Note:
- The power input can be taken from the autodoor control unit of AC/DC12-36V, or AC/DC 12V should be supplied to ensure enough capacity for running.
- DC12V power input should connect with 1 and 4 terminals.
- The actual output current of DC REGULATOR must be greater than the action current of the electric lock.
- The deeper installation place is , the weaker indicator voice is.